Tag: injection molding

Torsten’s Training Tip: Jetting

Injection molding polymer through small gates creates complex three-dimensional fluid flow behaviors. Jetting occurs in injection molding when polymer material is injected through a nozzle, runner, or gate at high velocity, into open, thicker areas, without forming contact with the mold wall.  The jetting effect is like water flowing through a hose. If you place your thumb on […]

Torsten’s Training Tip: Understanding Flow-Induced Molded-In Stress

Injection molding is a complex manufacturing process involving temperature and pressure. During the molding process polymer materials experience complex molecular chain deformation while undergoing temperature and pressure changes. Molded part properties and performance are dependent on, and influenced by, design complexity and the molding process. Understanding molded-in stress, specifically flow induced molded-in stress, is an […]

New Virtual Reality Training launches at MD&M West

Are you ready for a new way of learning? With our sights on training the next generation of injection molding professionals and industry veterans, we launched our new virtual reality training initiative at the MD&M West 2021 show in Anaheim, CA. The show brings together innovate thinkers, business leaders, and engineers from across the globe […]

Torsten’s Training Tip: Polymer Materials Overview

It is important for part and mold designers not only to understand design principles, but also to understand the fundamentals of plastics. The choice of a plastic, or polymer, has a strong impact on the outcome of a molded part. Polymers are categorized by processing methods and temperature behavior. The major groups are thermoplastics, thermosets, […]

New Training Topics Coming Soon

At Kruse Training we pride ourselves on the ability to consistently add new content and topics that meet the needs of the injection molding industry. With this in mind, we are currently undertaking a series of new topics focusing on areas that move beyond the basics of injection molding to the more complex aspects of […]

Torsten’s Training Tip: Cold Runner Types and Designs

Cold runner systems are an important aspect of mold design. By optimizing cold runner shapes and sizes, important molding processes such as pressure drops, polymer shearing, packing and cooling behavior, gate sealing time, and overall cycle time can be made more efficient. Cold runners are simply unheated channels that transport molten polymer material from a […]

Torsten’s Training Tip: Sink Marks and Voids

Two common and related injection molding defects, sink marks and voids, are the result of excessive polymer material shrinkage. Because it is essential to produce high quality parts free of molding defects, understanding the causes in order to reduce or eliminate sink marks in molded parts can be very helpful. Let’s review some basics. A […]

Molding Defects Level 2 Press Release

  For Immediate Release Kruse Training launches Molding Defects Level 2 interactive training for injection molders, part and mold designers and process engineers NAPLES, Fla., September 15, 2020 – Kruse Training Inc., a leading developer of interactive online training programs for injection molders, part and mold designers, and process engineers, is introducing Molding Defects Level […]

Torsten’s Training Tip: Gate Seal Time

Gate seal time is an important aspect of the packing phase that needs to be understood to produce high quality molded parts.  Setting proper gate seal time plays a key role in packing parts. Properly packed parts will have even internal polymer molecular structure, fewer volumetric shrinkage differences, optimized part dimensions, and fewer sink marks […]

Torsten’s Training Tip: Thermal Pins

Designing thermally optimized molds becomes more challenging as part designs become more complex. There are various cooling design strategies, from using drilled coolant circuits or baffles and bubblers, to selecting mold steels or thermal pins (sometimes called heat pipes or heat tubes.) Thermal pins are a cooling strategy to optimize thermal behavior inside a mold. […]