{"id":2114,"date":"2020-09-15T12:59:25","date_gmt":"2020-09-15T16:59:25","guid":{"rendered":"https:\/\/krusetraining.com\/espanol\/?p=2114"},"modified":"2023-10-13T14:05:34","modified_gmt":"2023-10-13T18:05:34","slug":"molding-defects-level-2-press-release","status":"publish","type":"post","link":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/","title":{"rendered":"Molding Defects Level 2 Press Release"},"content":{"rendered":"

 <\/p>\n

For Immediate Release<\/p>\n

Kruse Training launches Molding Defects Level 2 interactive training for injection molders, part and mold designers and process engineers<\/strong><\/p>\n

NAPLES, Fla., September 15, 2020 \u2013 Kruse Training Inc., a leading developer of interactive online training programs for injection molders, part and mold designers, and process engineers, is introducing Molding Defects Level 2 to its Circle of Knowledge online training program.<\/p>\n

The goal of this Molding Defects section is to teach the causes of common molding defects and how to prevent them. The online training is designed to help develop teams of cross-trained professionals who can successfully design and mold plastic components. The training combines interactive parts, animations, simulations, videos, quizzes and multimedia presentations that build skills and increase the confidence of injection molding engineers.<\/p>\n

The self-paced, interactive, step-by-step training builds on the company\u2019s successful Level 1 online training, which was released in 2018 and offers training in molding fundamentals, polymer materials, part and mold design, and processing.<\/p>\n

Molding Defects Level 2 users will learn about various molding defects that can occur during the injection molding process; will gain an understanding of how part design, mold design and the injection molding process impact molding defects; and will analyze molded parts and learn the cause and effect behaviors of design and process.<\/p>\n

\u201cMolding defects in injection-molded parts range from minor surface defects to major structural issues that significantly impact part quality,\u201d said Torsten Kruse, founder and president of Kruse Training and Kruse Analysis. \u201cMolding Defects Level 2 shows common molding defects, how and why they occur, and ways to minimize or prevent them.\u201d Kruse said his goal is to have 30 Molding Defects Level 2 lessons available for the NPE show in 2021<\/a>.<\/p>\n

What\u2019s new in Molding Defects Level 2 is that all 11 lessons allow learners to interactively manipulate the 3-D CAD parts based on the examples in that lesson, to see how each molding defect appears on the final molded part. There are multiple parts in each lesson and they can be viewed in various textures and colors, depending on the featured molding defect.<\/p>\n

All 11 lessons include video with part explanations, interactive 3-D molding defect examples, simulations, and cause and effect analyses. Each lesson takes approximately 15 to 25 minutes to complete, but learners are encouraged to go at their own pace and repeat the lessons as often as they want.<\/p>\n

Molding Defects Level 2 lessons cover short shots, entrapments, burn marks, flash, meld and weld lines, sink marks and voids, gate blush and halo, jetting, core deflection, dimensional challenges, and warpage. Click here to see the full list of lessons.\u00a0<\/a><\/p>\n

Kruse Training partnered with Moldex3D<\/a>, a leading provider of plastics simulation software, to create its interactive online training program. The software created visually engaging animations to help designers and injection molders understand plastics engineering knowledge and techniques, enabling them to foresee potential molding problems and excel in their professions.<\/p>\n

\u201cThe goal of Kruse Training is to help companies create a Circle of Knowledge and to make knowledge flow freely between part designers, mold designers, and process engineers, so each person can benefit from each other\u2019s expertise and fill knowledge gaps,\u201d Torsten Kruse said. \u00a0\u201cThe online training program permits companies to cross-train professionals from different roles, enabling them to collaborate better and develop synergistic solutions to move designs forward with better manufacturability. As the product development cycle becomes shorter, it\u2019s crucial for companies to improve collaboration and communication between different teams in the early development stage.\u201d<\/p>\n

The Kruse Training platform delivers knowledge and expertise developed by Torsten Kruse that he achieved during more than 30 years in the plastic injection molding industry. He is a leading expert in the injection molding industry, providing innovative CAE simulation services, software applications, and state-of-the-art online training for design and process engineers.<\/p>\n

Before starting his own companies, Kruse Analysis and Kruse Training, he had a successful 10-year career with Arburg Inc., working on various molding applications and developing and delivering training programs. He traveled extensively and obtained a wide spectrum of hands-on industry experience that he now shares with his simulation and training clients. He is a graduate of the Plastic Technology Institute in Braunschweig, Germany.<\/p>\n

High-resolution photos that illustrate 3D CAD parts and other images from Molding Defects Level 2 are available by contacting Torsten Kruse at Torsten_kruse@krusetraining.com\/espanol<\/a>.<\/p>\n

For more information on Kruse Training, visit www.krusetraining.com\/espanol<\/a>\/. For more information on Kruse Analysis, visit www.kruseanalysis.com\/<\/a>.<\/p>\n

 <\/p>\n

###<\/p>\n

About Kruse Training<\/strong><\/p>\n

Kruse Training is an online knowledge and training solution for part designers, mold designers, and senior process engineers. Web-based and future-oriented, this interactive online program imparts both foundational and expert knowledge. The Kruse Training platform is designed to present information in a logical sequence. The unique \u201cfocused-learning\u201d system combines animations, simulations, videos, quizzes, and multimedia presentations that build skills and increase confidence.<\/p>\n

The goal of Kruse Training is to develop synergistic teams of cross-trained professionals who can successfully design and mold plastic components.<\/p>\n

When knowledge flows from the part designer to the mold designer to the process engineer, and back again, a \u201cCircle of Knowledge\u201d is created within the team. For more information, visit www.krusetraining.com\/espanol<\/a>.<\/p>\n

Contact:<\/p>\n

Torsten Kruse<\/p>\n

Torsten_kruse@krusetraining.com\/espanol<\/a><\/p>\n

Tel: 239-351-7428<\/p>\n","protected":false},"excerpt":{"rendered":"

  For Immediate Release Kruse Training launches Molding Defects Level 2 interactive training for injection molders, part and mold designers and process engineers NAPLES, Fla., September 15, 2020 \u2013 Kruse Training Inc., a leading developer of interactive online training programs for injection molders, part and mold designers, and process engineers, is introducing Molding Defects Level […]<\/p>\n","protected":false},"author":19,"featured_media":2115,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"om_disable_all_campaigns":false,"footnotes":""},"categories":[1097],"tags":[606,1098,1170,1171],"class_list":["post-2114","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-press-release","tag-injection-molding","tag-press-release","tag-molding-defects","tag-news"],"acf":[],"yoast_head":"\nMolding Defects Level 2 Press Release - Kruse Training (Spanish)<\/title>\n<meta name=\"description\" content=\"Kruse Training launches Molding Defects Level 2 interactive training for injection molders, part and mold designers and process engineers.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/\" \/>\n<meta property=\"og:locale\" content=\"es_MX\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Molding Defects Level 2 Press Release\" \/>\n<meta property=\"og:description\" content=\"Kruse Training launches Molding Defects Level 2 interactive training for injection molders, part and mold designers and process engineers.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/\" \/>\n<meta property=\"og:site_name\" content=\"Kruse Training (Spanish)\" \/>\n<meta property=\"article:published_time\" content=\"2020-09-15T16:59:25+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-10-13T18:05:34+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/krusetraining.com\/espanol\/wp-content\/uploads\/sites\/4\/2020\/09\/KruseTraining-MoldingDefect-lesson01-002-scaled.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"2560\" \/>\n\t<meta property=\"og:image:height\" content=\"1440\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Torsten Kruse\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@krusetraining\" \/>\n<meta name=\"twitter:site\" content=\"@krusetraining\" \/>\n<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t<meta name=\"twitter:data1\" content=\"Torsten Kruse\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/\"},\"author\":{\"name\":\"Torsten Kruse\",\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/#\\\/schema\\\/person\\\/2e88a0cffdcd60d3233d578f37a40088\"},\"headline\":\"Molding Defects Level 2 Press Release\",\"datePublished\":\"2020-09-15T16:59:25+00:00\",\"dateModified\":\"2023-10-13T18:05:34+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/\"},\"wordCount\":868,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2020\\\/09\\\/KruseTraining-MoldingDefect-lesson01-002-scaled.jpg\",\"keywords\":[\"injection molding\",\"press release\",\"molding defects\",\"news\"],\"articleSection\":[\"Press Release\"],\"inLanguage\":\"es\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/\",\"url\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/\",\"name\":\"Molding Defects Level 2 Press Release - Kruse Training (Spanish)\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2020\\\/09\\\/KruseTraining-MoldingDefect-lesson01-002-scaled.jpg\",\"datePublished\":\"2020-09-15T16:59:25+00:00\",\"dateModified\":\"2023-10-13T18:05:34+00:00\",\"description\":\"Kruse Training launches Molding Defects Level 2 interactive training for injection molders, part and mold designers and process engineers.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/#breadcrumb\"},\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/#primaryimage\",\"url\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2020\\\/09\\\/KruseTraining-MoldingDefect-lesson01-002-scaled.jpg\",\"contentUrl\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2020\\\/09\\\/KruseTraining-MoldingDefect-lesson01-002-scaled.jpg\",\"width\":2560,\"height\":1440,\"caption\":\"3d CAD image of short shots\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/2020\\\/09\\\/15\\\/molding-defects-level-2-press-release\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Molding Defects Level 2 Press Release\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/#website\",\"url\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/\",\"name\":\"Kruse Training (Spanish)\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"es\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/#organization\",\"name\":\"Kruse Training\",\"url\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2018\\\/06\\\/KT-LOGO.jpg\",\"contentUrl\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2018\\\/06\\\/KT-LOGO.jpg\",\"width\":1968,\"height\":1411,\"caption\":\"Kruse Training\"},\"image\":{\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/krusetraining\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/kruseanalysis\\\/\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UC2lPoGtSbSMB0BdRgbHm7qw\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/#\\\/schema\\\/person\\\/2e88a0cffdcd60d3233d578f37a40088\",\"name\":\"Torsten Kruse\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f20abdd247c87a2a78e62ca0a5e94844a36f1c2b0a63c599502419c0816009c3?s=96&d=mm&r=pg\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f20abdd247c87a2a78e62ca0a5e94844a36f1c2b0a63c599502419c0816009c3?s=96&d=mm&r=pg\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f20abdd247c87a2a78e62ca0a5e94844a36f1c2b0a63c599502419c0816009c3?s=96&d=mm&r=pg\",\"caption\":\"Torsten Kruse\"},\"sameAs\":[\"http:\\\/\\\/www.krusetraining.com\",\"https:\\\/\\\/x.com\\\/krusetraining\"],\"url\":\"https:\\\/\\\/krusetraining.com\\\/espanol\\\/author\\\/torstenkruse\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Molding Defects Level 2 Press Release - Kruse Training (Spanish)","description":"Kruse Training launches Molding Defects Level 2 interactive training for injection molders, part and mold designers and process engineers.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/","og_locale":"es_MX","og_type":"article","og_title":"Molding Defects Level 2 Press Release","og_description":"Kruse Training launches Molding Defects Level 2 interactive training for injection molders, part and mold designers and process engineers.","og_url":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/","og_site_name":"Kruse Training (Spanish)","article_published_time":"2020-09-15T16:59:25+00:00","article_modified_time":"2023-10-13T18:05:34+00:00","og_image":[{"width":2560,"height":1440,"url":"https:\/\/krusetraining.com\/espanol\/wp-content\/uploads\/sites\/4\/2020\/09\/KruseTraining-MoldingDefect-lesson01-002-scaled.jpg","type":"image\/jpeg"}],"author":"Torsten Kruse","twitter_card":"summary_large_image","twitter_creator":"@krusetraining","twitter_site":"@krusetraining","twitter_misc":{"Escrito por":"Torsten Kruse","Tiempo de lectura":"4 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/#article","isPartOf":{"@id":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/"},"author":{"name":"Torsten Kruse","@id":"https:\/\/krusetraining.com\/espanol\/#\/schema\/person\/2e88a0cffdcd60d3233d578f37a40088"},"headline":"Molding Defects Level 2 Press Release","datePublished":"2020-09-15T16:59:25+00:00","dateModified":"2023-10-13T18:05:34+00:00","mainEntityOfPage":{"@id":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/"},"wordCount":868,"commentCount":0,"publisher":{"@id":"https:\/\/krusetraining.com\/espanol\/#organization"},"image":{"@id":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/#primaryimage"},"thumbnailUrl":"https:\/\/krusetraining.com\/espanol\/wp-content\/uploads\/sites\/4\/2020\/09\/KruseTraining-MoldingDefect-lesson01-002-scaled.jpg","keywords":["injection molding","press release","molding defects","news"],"articleSection":["Press Release"],"inLanguage":"es"},{"@type":"WebPage","@id":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/","url":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/","name":"Molding Defects Level 2 Press Release - Kruse Training (Spanish)","isPartOf":{"@id":"https:\/\/krusetraining.com\/espanol\/#website"},"primaryImageOfPage":{"@id":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/#primaryimage"},"image":{"@id":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/#primaryimage"},"thumbnailUrl":"https:\/\/krusetraining.com\/espanol\/wp-content\/uploads\/sites\/4\/2020\/09\/KruseTraining-MoldingDefect-lesson01-002-scaled.jpg","datePublished":"2020-09-15T16:59:25+00:00","dateModified":"2023-10-13T18:05:34+00:00","description":"Kruse Training launches Molding Defects Level 2 interactive training for injection molders, part and mold designers and process engineers.","breadcrumb":{"@id":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/#breadcrumb"},"inLanguage":"es","potentialAction":[{"@type":"ReadAction","target":["https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/"]}]},{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/#primaryimage","url":"https:\/\/krusetraining.com\/espanol\/wp-content\/uploads\/sites\/4\/2020\/09\/KruseTraining-MoldingDefect-lesson01-002-scaled.jpg","contentUrl":"https:\/\/krusetraining.com\/espanol\/wp-content\/uploads\/sites\/4\/2020\/09\/KruseTraining-MoldingDefect-lesson01-002-scaled.jpg","width":2560,"height":1440,"caption":"3d CAD image of short shots"},{"@type":"BreadcrumbList","@id":"https:\/\/krusetraining.com\/espanol\/2020\/09\/15\/molding-defects-level-2-press-release\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/krusetraining.com\/espanol\/"},{"@type":"ListItem","position":2,"name":"Molding Defects Level 2 Press Release"}]},{"@type":"WebSite","@id":"https:\/\/krusetraining.com\/espanol\/#website","url":"https:\/\/krusetraining.com\/espanol\/","name":"Kruse Training (Spanish)","description":"","publisher":{"@id":"https:\/\/krusetraining.com\/espanol\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/krusetraining.com\/espanol\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"es"},{"@type":"Organization","@id":"https:\/\/krusetraining.com\/espanol\/#organization","name":"Kruse Training","url":"https:\/\/krusetraining.com\/espanol\/","logo":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/krusetraining.com\/espanol\/#\/schema\/logo\/image\/","url":"https:\/\/krusetraining.com\/espanol\/wp-content\/uploads\/sites\/4\/2018\/06\/KT-LOGO.jpg","contentUrl":"https:\/\/krusetraining.com\/espanol\/wp-content\/uploads\/sites\/4\/2018\/06\/KT-LOGO.jpg","width":1968,"height":1411,"caption":"Kruse Training"},"image":{"@id":"https:\/\/krusetraining.com\/espanol\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/x.com\/krusetraining","https:\/\/www.linkedin.com\/in\/kruseanalysis\/","https:\/\/www.youtube.com\/channel\/UC2lPoGtSbSMB0BdRgbHm7qw"]},{"@type":"Person","@id":"https:\/\/krusetraining.com\/espanol\/#\/schema\/person\/2e88a0cffdcd60d3233d578f37a40088","name":"Torsten Kruse","image":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/secure.gravatar.com\/avatar\/f20abdd247c87a2a78e62ca0a5e94844a36f1c2b0a63c599502419c0816009c3?s=96&d=mm&r=pg","url":"https:\/\/secure.gravatar.com\/avatar\/f20abdd247c87a2a78e62ca0a5e94844a36f1c2b0a63c599502419c0816009c3?s=96&d=mm&r=pg","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/f20abdd247c87a2a78e62ca0a5e94844a36f1c2b0a63c599502419c0816009c3?s=96&d=mm&r=pg","caption":"Torsten Kruse"},"sameAs":["http:\/\/www.krusetraining.com","https:\/\/x.com\/krusetraining"],"url":"https:\/\/krusetraining.com\/espanol\/author\/torstenkruse\/"}]}},"_links":{"self":[{"href":"https:\/\/krusetraining.com\/espanol\/wp-json\/wp\/v2\/posts\/2114","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/krusetraining.com\/espanol\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/krusetraining.com\/espanol\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/krusetraining.com\/espanol\/wp-json\/wp\/v2\/users\/19"}],"replies":[{"embeddable":true,"href":"https:\/\/krusetraining.com\/espanol\/wp-json\/wp\/v2\/comments?post=2114"}],"version-history":[{"count":0,"href":"https:\/\/krusetraining.com\/espanol\/wp-json\/wp\/v2\/posts\/2114\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/krusetraining.com\/espanol\/wp-json\/wp\/v2\/media\/2115"}],"wp:attachment":[{"href":"https:\/\/krusetraining.com\/espanol\/wp-json\/wp\/v2\/media?parent=2114"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/krusetraining.com\/espanol\/wp-json\/wp\/v2\/categories?post=2114"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/krusetraining.com\/espanol\/wp-json\/wp\/v2\/tags?post=2114"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}