Torsten’s Training Tips: Packing Pressure Profiles (Amorphous and Semi-Crystalline Materials)
One of the key steps in the injection molding process is the packing and holding phase, sometimes also referred to as the compensation phase. During the packing phase material is continuously “packed” into a cavity, thereby compensating for the shrinkage that occurs due to material cooling inside the mold. To optimize a packing profile, it […]
Torsten’s Training Tips: Nozzle Tip Designs
Molding high quality parts is dependent on many factors, including skillful part and mold design, an understanding of polymer material behavior, and an optimized process. The three common nozzle tip designs found in the injection molding industry are general purpose, reverse taper, and free flow. Nozzle tip design and size will impact mold filling, process […]
New Processing Lessons: Cooling and Packing
We are excited to announce our latest lessons in the Processing category. There are six brand new lessons focused on the Cooling and Packing phase. These lessons continue to build on our foundational level of injection molding training. Filling Phase Lessons Include: Lesson 1 – Packing Pressure Profiles: Amorphous Materials This lesson reviews the internal […]
Torsten’s Training Tips: Ejector Pin Sub-Gates
Gate design and placement are key factors in mold design. Because parts often need to be molded without surface marks or gate vestige, certain gate styles are more appropriate than others. Although many gate systems will leave behind a witness mark, selecting a gate that can be hidden inside the ejector pin with an automatically […]
Torsten’s Training Tips: Mechanical Material Behavior
Injection molding manufacturing produces many everyday parts, from pipet tips to car bumpers in a variety of polymer materials. Some parts are produced from neat, unfilled materials and some from materials that are filled with reinforcements and additives. Part designers should be able to evaluate the mechanical material behavior and properties of these different polymers […]
Torsten’s Training Tips: Designing Cold Runner Systems
Designing effective cold runner systems is as important as designing a molded part. After optimizing the gate location for a new part design, the next step is to determine the best cold runner size. Cold runner size will influence overall part quality, molding cycle time, and overall profits. Identifying critical material process characterizations that will […]
Torsten’s Training Tips: Fill Speed Profiles
Evaluating and understanding fill speed profiles is an important aspect of injection molding. Polymer materials can flow by heating them to their melting range. Every polymer has a melt and mold temperature range, and within that range the polymers flow and can be injected into a mold. Molten polymer is injected into the mold by […]
